From c068f22329d5cc722622a2183bbb22eef2093df7 Mon Sep 17 00:00:00 2001 From: Felix Morgner Date: Mon, 24 Aug 2026 11:16:07 +0200 Subject: initial import --- platforms/vs2010/include/libjpeg/jconfig.h | 40 + platforms/vs2010/include/libjpeg/jerror.h | 314 +++++++ platforms/vs2010/include/libjpeg/jmorecfg.h | 404 +++++++++ platforms/vs2010/include/libjpeg/jpeglib.h | 1213 ++++++++++++++++++++++++++ platforms/vs2010/include/libjpeg/turbojpeg.h | 917 +++++++++++++++++++ 5 files changed, 2888 insertions(+) create mode 100755 platforms/vs2010/include/libjpeg/jconfig.h create mode 100755 platforms/vs2010/include/libjpeg/jerror.h create mode 100755 platforms/vs2010/include/libjpeg/jmorecfg.h create mode 100755 platforms/vs2010/include/libjpeg/jpeglib.h create mode 100755 platforms/vs2010/include/libjpeg/turbojpeg.h (limited to 'platforms/vs2010/include/libjpeg') diff --git a/platforms/vs2010/include/libjpeg/jconfig.h b/platforms/vs2010/include/libjpeg/jconfig.h new file mode 100755 index 0000000..7c96c92 --- /dev/null +++ b/platforms/vs2010/include/libjpeg/jconfig.h @@ -0,0 +1,40 @@ +/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */ +/* see jconfig.txt for explanations */ + +#define JPEG_LIB_VERSION 62 +#define LIBJPEG_TURBO_VERSION 1.2.1 +#define C_ARITH_CODING_SUPPORTED +#define D_ARITH_CODING_SUPPORTED + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not int, per Windows custom */ +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ + +/* Define "INT32" as int, not long, per Windows custom */ +#if !(defined(_BASETSD_H_) || defined(_BASETSD_H)) /* don't conflict if basetsd.h already read */ +typedef short INT16; +typedef signed int INT32; +#endif +#define XMD_H /* prevent jmorecfg.h from redefining it */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ diff --git a/platforms/vs2010/include/libjpeg/jerror.h b/platforms/vs2010/include/libjpeg/jerror.h new file mode 100755 index 0000000..275086e --- /dev/null +++ b/platforms/vs2010/include/libjpeg/jerror.h @@ -0,0 +1,314 @@ +/* + * jerror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the JPEG library. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + * A set of error-reporting macros are defined too. Some applications using + * the JPEG library may wish to include this file to get the error codes + * and/or the macros. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef JERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* JERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ + +/* For maintenance convenience, list is alphabetical by message code name */ +#if JPEG_LIB_VERSION < 70 +JMESSAGE(JERR_ARITH_NOTIMPL, + "Sorry, arithmetic coding is not implemented") +#endif +JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") +JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") +JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") +JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +#if JPEG_LIB_VERSION >= 70 +JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") +#endif +JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") +JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported") +#if JPEG_LIB_VERSION >= 70 +JMESSAGE(JERR_BAD_DROP_SAMPLING, + "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c") +#endif +JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") +JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") +JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") +JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") +JMESSAGE(JERR_BAD_LIB_VERSION, + "Wrong JPEG library version: library is %d, caller expects %d") +JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") +JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") +JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") +JMESSAGE(JERR_BAD_PROGRESSION, + "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") +JMESSAGE(JERR_BAD_PROG_SCRIPT, + "Invalid progressive parameters at scan script entry %d") +JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") +JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") +JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") +JMESSAGE(JERR_BAD_STRUCT_SIZE, + "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u") +JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") +JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") +JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") +JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") +JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") +JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") +JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") +JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") +JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") +JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") +JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") +JMESSAGE(JERR_EMS_READ, "Read from EMS failed") +JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") +JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") +JMESSAGE(JERR_FILE_READ, "Input file read error") +JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") +JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") +JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") +JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") +JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") +JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") +JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") +JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, + "Cannot transcode due to multiple use of quantization table %d") +JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") +JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") +JMESSAGE(JERR_NOTIMPL, "Not implemented yet") +JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") +#if JPEG_LIB_VERSION >= 70 +JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined") +#endif +JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") +JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") +JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") +JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") +JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") +JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") +JMESSAGE(JERR_QUANT_COMPONENTS, + "Cannot quantize more than %d color components") +JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") +JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") +JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") +JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") +JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") +JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") +JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") +JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") +JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") +JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") +JMESSAGE(JERR_TFILE_WRITE, + "Write failed on temporary file --- out of disk space?") +JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") +JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") +JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") +JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") +JMESSAGE(JERR_XMS_READ, "Read from XMS failed") +JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") +JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) +JMESSAGE(JMSG_VERSION, JVERSION) +JMESSAGE(JTRC_16BIT_TABLES, + "Caution: quantization tables are too coarse for baseline JPEG") +JMESSAGE(JTRC_ADOBE, + "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") +JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") +JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") +JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") +JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") +JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") +JMESSAGE(JTRC_DRI, "Define Restart Interval %u") +JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") +JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") +JMESSAGE(JTRC_EOI, "End Of Image") +JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") +JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d") +JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, + "Warning: thumbnail image size does not match data length %u") +JMESSAGE(JTRC_JFIF_EXTENSION, + "JFIF extension marker: type 0x%02x, length %u") +JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") +JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u") +JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") +JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") +JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") +JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") +JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") +JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") +JMESSAGE(JTRC_RST, "RST%d") +JMESSAGE(JTRC_SMOOTH_NOTIMPL, + "Smoothing not supported with nonstandard sampling ratios") +JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") +JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") +JMESSAGE(JTRC_SOI, "Start of Image") +JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") +JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") +JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") +JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") +JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") +JMESSAGE(JTRC_THUMB_JPEG, + "JFIF extension marker: JPEG-compressed thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_PALETTE, + "JFIF extension marker: palette thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_RGB, + "JFIF extension marker: RGB thumbnail image, length %u") +JMESSAGE(JTRC_UNKNOWN_IDS, + "Unrecognized component IDs %d %d %d, assuming YCbCr") +JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") +JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") +JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") +#if JPEG_LIB_VERSION >= 70 +JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code") +#endif +JMESSAGE(JWRN_BOGUS_PROGRESSION, + "Inconsistent progression sequence for component %d coefficient %d") +JMESSAGE(JWRN_EXTRANEOUS_DATA, + "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") +JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") +JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") +JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") +JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") +JMESSAGE(JWRN_MUST_RESYNC, + "Corrupt JPEG data: found marker 0x%02x instead of RST%d") +JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") +JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") +#if JPEG_LIB_VERSION < 70 +JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") +#if defined(C_ARITH_CODING_SUPPORTED) || defined(D_ARITH_CODING_SUPPORTED) +JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined") +JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code") +#endif +#endif + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTMSGCODE +} J_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE + + +#ifndef JERROR_H +#define JERROR_H + +/* Macros to simplify using the error and trace message stuff */ +/* The first parameter is either type of cinfo pointer */ + +/* Fatal errors (print message and exit) */ +#define ERREXIT(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT3(cinfo,code,p1,p2,p3) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXITS(cinfo,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) + +#define MAKESTMT(stuff) do { stuff } while (0) + +/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ +#define WARNMS(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) + +/* Informational/debugging messages */ +#define TRACEMS(cinfo,lvl,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS1(cinfo,lvl,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS2(cinfo,lvl,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMSS(cinfo,lvl,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) + +#endif /* JERROR_H */ diff --git a/platforms/vs2010/include/libjpeg/jmorecfg.h b/platforms/vs2010/include/libjpeg/jmorecfg.h new file mode 100755 index 0000000..f22c4f3 --- /dev/null +++ b/platforms/vs2010/include/libjpeg/jmorecfg.h @@ -0,0 +1,404 @@ +/* + * jmorecfg.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Copyright (C) 2009, 2011, D. R. Commander. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains additional configuration options that customize the + * JPEG software for special applications or support machine-dependent + * optimizations. Most users will not need to touch this file. + */ + + +/* + * Define BITS_IN_JSAMPLE as either + * 8 for 8-bit sample values (the usual setting) + * 12 for 12-bit sample values + * Only 8 and 12 are legal data precisions for lossy JPEG according to the + * JPEG standard, and the IJG code does not support anything else! + * We do not support run-time selection of data precision, sorry. + */ + +#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ + + +/* + * Maximum number of components (color channels) allowed in JPEG image. + * To meet the letter of the JPEG spec, set this to 255. However, darn + * few applications need more than 4 channels (maybe 5 for CMYK + alpha + * mask). We recommend 10 as a reasonable compromise; use 4 if you are + * really short on memory. (Each allowed component costs a hundred or so + * bytes of storage, whether actually used in an image or not.) + */ + +#define MAX_COMPONENTS 10 /* maximum number of image components */ + + +/* + * Basic data types. + * You may need to change these if you have a machine with unusual data + * type sizes; for example, "char" not 8 bits, "short" not 16 bits, + * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, + * but it had better be at least 16. + */ + +/* Representation of a single sample (pixel element value). + * We frequently allocate large arrays of these, so it's important to keep + * them small. But if you have memory to burn and access to char or short + * arrays is very slow on your hardware, you might want to change these. + */ + +#if BITS_IN_JSAMPLE == 8 +/* JSAMPLE should be the smallest type that will hold the values 0..255. + * You can use a signed char by having GETJSAMPLE mask it with 0xFF. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JSAMPLE; +#ifdef __CHAR_UNSIGNED__ +#define GETJSAMPLE(value) ((int) (value)) +#else +#define GETJSAMPLE(value) ((int) (value) & 0xFF) +#endif /* __CHAR_UNSIGNED__ */ + +#endif /* HAVE_UNSIGNED_CHAR */ + +#define MAXJSAMPLE 255 +#define CENTERJSAMPLE 128 + +#endif /* BITS_IN_JSAMPLE == 8 */ + + +#if BITS_IN_JSAMPLE == 12 +/* JSAMPLE should be the smallest type that will hold the values 0..4095. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 4095 +#define CENTERJSAMPLE 2048 + +#endif /* BITS_IN_JSAMPLE == 12 */ + + +/* Representation of a DCT frequency coefficient. + * This should be a signed value of at least 16 bits; "short" is usually OK. + * Again, we allocate large arrays of these, but you can change to int + * if you have memory to burn and "short" is really slow. + */ + +typedef short JCOEF; + + +/* Compressed datastreams are represented as arrays of JOCTET. + * These must be EXACTLY 8 bits wide, at least once they are written to + * external storage. Note that when using the stdio data source/destination + * managers, this is also the data type passed to fread/fwrite. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JOCTET; +#define GETJOCTET(value) (value) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JOCTET; +#ifdef __CHAR_UNSIGNED__ +#define GETJOCTET(value) (value) +#else +#define GETJOCTET(value) ((value) & 0xFF) +#endif /* __CHAR_UNSIGNED__ */ + +#endif /* HAVE_UNSIGNED_CHAR */ + + +/* These typedefs are used for various table entries and so forth. + * They must be at least as wide as specified; but making them too big + * won't cost a huge amount of memory, so we don't provide special + * extraction code like we did for JSAMPLE. (In other words, these + * typedefs live at a different point on the speed/space tradeoff curve.) + */ + +/* UINT8 must hold at least the values 0..255. */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char UINT8; +#else /* not HAVE_UNSIGNED_CHAR */ +#ifdef __CHAR_UNSIGNED__ +typedef char UINT8; +#else /* not __CHAR_UNSIGNED__ */ +typedef short UINT8; +#endif /* __CHAR_UNSIGNED__ */ +#endif /* HAVE_UNSIGNED_CHAR */ + +/* UINT16 must hold at least the values 0..65535. */ + +#ifdef HAVE_UNSIGNED_SHORT +typedef unsigned short UINT16; +#else /* not HAVE_UNSIGNED_SHORT */ +typedef unsigned int UINT16; +#endif /* HAVE_UNSIGNED_SHORT */ + +/* INT16 must hold at least the values -32768..32767. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ +typedef short INT16; +#endif + +/* INT32 must hold at least signed 32-bit values. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ +typedef long INT32; +#endif + +/* Datatype used for image dimensions. The JPEG standard only supports + * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore + * "unsigned int" is sufficient on all machines. However, if you need to + * handle larger images and you don't mind deviating from the spec, you + * can change this datatype. + */ + +typedef unsigned int JDIMENSION; + +#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ + + +/* These macros are used in all function definitions and extern declarations. + * You could modify them if you need to change function linkage conventions; + * in particular, you'll need to do that to make the library a Windows DLL. + * Another application is to make all functions global for use with debuggers + * or code profilers that require it. + */ + +/* a function called through method pointers: */ +#define METHODDEF(type) static type +/* a function used only in its module: */ +#define LOCAL(type) static type +/* a function referenced thru EXTERNs: */ +#define GLOBAL(type) type +/* a reference to a GLOBAL function: */ +#define EXTERN(type) extern type + + +/* This macro is used to declare a "method", that is, a function pointer. + * We want to supply prototype parameters if the compiler can cope. + * Note that the arglist parameter must be parenthesized! + * Again, you can customize this if you need special linkage keywords. + */ + +#ifdef HAVE_PROTOTYPES +#define JMETHOD(type,methodname,arglist) type (*methodname) arglist +#else +#define JMETHOD(type,methodname,arglist) type (*methodname) () +#endif + + +/* Here is the pseudo-keyword for declaring pointers that must be "far" + * on 80x86 machines. Most of the specialized coding for 80x86 is handled + * by just saying "FAR *" where such a pointer is needed. In a few places + * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. + */ + +#ifdef NEED_FAR_POINTERS +#define FAR far +#else +#define FAR +#endif + + +/* + * On a few systems, type boolean and/or its values FALSE, TRUE may appear + * in standard header files. Or you may have conflicts with application- + * specific header files that you want to include together with these files. + * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. + */ + +#ifndef HAVE_BOOLEAN +typedef int boolean; +#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif + + +/* + * The remaining options affect code selection within the JPEG library, + * but they don't need to be visible to most applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. + */ + +#ifdef JPEG_INTERNALS +#define JPEG_INTERNAL_OPTIONS +#endif + +#ifdef JPEG_INTERNAL_OPTIONS + + +/* + * These defines indicate whether to include various optional functions. + * Undefining some of these symbols will produce a smaller but less capable + * library. Note that you can leave certain source files out of the + * compilation/linking process if you've #undef'd the corresponding symbols. + * (You may HAVE to do that if your compiler doesn't like null source files.) + */ + +/* Capability options common to encoder and decoder: */ + +#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ +#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ +#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ + +/* Encoder capability options: */ + +#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ +/* Note: if you selected 12-bit data precision, it is dangerous to turn off + * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit + * precision, so jchuff.c normally uses entropy optimization to compute + * usable tables for higher precision. If you don't want to do optimization, + * you'll have to supply different default Huffman tables. + * The exact same statements apply for progressive JPEG: the default tables + * don't work for progressive mode. (This may get fixed, however.) + */ +#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ + +/* Decoder capability options: */ + +#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ +#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ +#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ +#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ +#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ +#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ +#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ + +/* more capability options later, no doubt */ + + +/* + * Ordering of RGB data in scanlines passed to or from the application. + * If your application wants to deal with data in the order B,G,R, just + * change these macros. You can also deal with formats such as R,G,B,X + * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing + * the offsets will also change the order in which colormap data is organized. + * RESTRICTIONS: + * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. + * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not + * useful if you are using JPEG color spaces other than YCbCr or grayscale. + * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE + * is not 3 (they don't understand about dummy color components!). So you + * can't use color quantization if you change that value. + */ + +#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ +#define RGB_GREEN 1 /* Offset of Green */ +#define RGB_BLUE 2 /* Offset of Blue */ +#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */ + +#define JPEG_NUMCS 16 + +#define EXT_RGB_RED 0 +#define EXT_RGB_GREEN 1 +#define EXT_RGB_BLUE 2 +#define EXT_RGB_PIXELSIZE 3 + +#define EXT_RGBX_RED 0 +#define EXT_RGBX_GREEN 1 +#define EXT_RGBX_BLUE 2 +#define EXT_RGBX_PIXELSIZE 4 + +#define EXT_BGR_RED 2 +#define EXT_BGR_GREEN 1 +#define EXT_BGR_BLUE 0 +#define EXT_BGR_PIXELSIZE 3 + +#define EXT_BGRX_RED 2 +#define EXT_BGRX_GREEN 1 +#define EXT_BGRX_BLUE 0 +#define EXT_BGRX_PIXELSIZE 4 + +#define EXT_XBGR_RED 3 +#define EXT_XBGR_GREEN 2 +#define EXT_XBGR_BLUE 1 +#define EXT_XBGR_PIXELSIZE 4 + +#define EXT_XRGB_RED 1 +#define EXT_XRGB_GREEN 2 +#define EXT_XRGB_BLUE 3 +#define EXT_XRGB_PIXELSIZE 4 + +static const int rgb_red[JPEG_NUMCS] = { + -1, -1, RGB_RED, -1, -1, -1, EXT_RGB_RED, EXT_RGBX_RED, + EXT_BGR_RED, EXT_BGRX_RED, EXT_XBGR_RED, EXT_XRGB_RED, + EXT_RGBX_RED, EXT_BGRX_RED, EXT_XBGR_RED, EXT_XRGB_RED +}; + +static const int rgb_green[JPEG_NUMCS] = { + -1, -1, RGB_GREEN, -1, -1, -1, EXT_RGB_GREEN, EXT_RGBX_GREEN, + EXT_BGR_GREEN, EXT_BGRX_GREEN, EXT_XBGR_GREEN, EXT_XRGB_GREEN, + EXT_RGBX_GREEN, EXT_BGRX_GREEN, EXT_XBGR_GREEN, EXT_XRGB_GREEN +}; + +static const int rgb_blue[JPEG_NUMCS] = { + -1, -1, RGB_BLUE, -1, -1, -1, EXT_RGB_BLUE, EXT_RGBX_BLUE, + EXT_BGR_BLUE, EXT_BGRX_BLUE, EXT_XBGR_BLUE, EXT_XRGB_BLUE, + EXT_RGBX_BLUE, EXT_BGRX_BLUE, EXT_XBGR_BLUE, EXT_XRGB_BLUE +}; + +static const int rgb_pixelsize[JPEG_NUMCS] = { + -1, -1, RGB_PIXELSIZE, -1, -1, -1, EXT_RGB_PIXELSIZE, EXT_RGBX_PIXELSIZE, + EXT_BGR_PIXELSIZE, EXT_BGRX_PIXELSIZE, EXT_XBGR_PIXELSIZE, EXT_XRGB_PIXELSIZE, + EXT_RGBX_PIXELSIZE, EXT_BGRX_PIXELSIZE, EXT_XBGR_PIXELSIZE, EXT_XRGB_PIXELSIZE +}; + +/* Definitions for speed-related optimizations. */ + +/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying + * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER + * as short on such a machine. MULTIPLIER must be at least 16 bits wide. + */ + +#ifndef MULTIPLIER +#ifndef WITH_SIMD +#define MULTIPLIER int /* type for fastest integer multiply */ +#else +#define MULTIPLIER short /* prefer 16-bit with SIMD for parellelism */ +#endif +#endif + + +/* FAST_FLOAT should be either float or double, whichever is done faster + * by your compiler. (Note that this type is only used in the floating point + * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) + * Typically, float is faster in ANSI C compilers, while double is faster in + * pre-ANSI compilers (because they insist on converting to double anyway). + * The code below therefore chooses float if we have ANSI-style prototypes. + */ + +#ifndef FAST_FLOAT +#ifdef HAVE_PROTOTYPES +#define FAST_FLOAT float +#else +#define FAST_FLOAT double +#endif +#endif + +#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/platforms/vs2010/include/libjpeg/jpeglib.h b/platforms/vs2010/include/libjpeg/jpeglib.h new file mode 100755 index 0000000..d19a3ef --- /dev/null +++ b/platforms/vs2010/include/libjpeg/jpeglib.h @@ -0,0 +1,1213 @@ +/* + * jpeglib.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2002-2009 by Guido Vollbeding. + * Copyright (C) 2009-2011, D. R. Commander. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +/* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jconfig.h" /* widely used configuration options */ +#endif +#include "jmorecfg.h" /* seldom changed options */ + + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +extern "C" { +#endif +#endif + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, so don't change them + * if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This array gives the coefficient quantizers in natural array order + * (not the zigzag order in which they are stored in a JPEG DQT marker). + * CAUTION: IJG versions prior to v6a kept this array in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples. Always DCTSIZE for compression. + * For decompression this is the size of the output from one DCT block, + * reflecting any scaling we choose to apply during the IDCT step. + * Values of 1,2,4,8 are likely to be supported. Note that different + * components may receive different IDCT scalings. + */ +#if JPEG_LIB_VERSION >= 70 + int DCT_h_scaled_size; + int DCT_v_scaled_size; +#else + int DCT_scaled_size; +#endif + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface), thus + * downsampled_width = ceil(image_width * Hi/Hmax) + * and similarly for height. For decompression, IDCT scaling is included, so + * downsampled_width = ceil(image_width * Hi/Hmax * DCT_[h_]scaled_size/DCTSIZE) + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* This flag is used only for decompression. In cases where some of the + * components will be ignored (eg grayscale output from YCbCr image), + * we can skip most computations for the unused components. + */ + boolean component_needed; /* do we need the value of this component? */ + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples, MCU_width*DCT_[h_]scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is currently used only for decompression. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + +/* The decompressor can save APPn and COM markers in a list of these: */ + +typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; + +struct jpeg_marker_struct { + jpeg_saved_marker_ptr next; /* next in list, or NULL */ + UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ + unsigned int original_length; /* # bytes of data in the file */ + unsigned int data_length; /* # bytes of data saved at data[] */ + JOCTET FAR * data; /* the data contained in the marker */ + /* the marker length word is not counted in data_length or original_length */ +}; + +/* Known color spaces. */ + +#define JCS_EXTENSIONS 1 +#define JCS_ALPHA_EXTENSIONS 1 + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue as specified by the RGB_RED, RGB_GREEN, + RGB_BLUE, and RGB_PIXELSIZE macros */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK, /* Y/Cb/Cr/K */ + JCS_EXT_RGB, /* red/green/blue */ + JCS_EXT_RGBX, /* red/green/blue/x */ + JCS_EXT_BGR, /* blue/green/red */ + JCS_EXT_BGRX, /* blue/green/red/x */ + JCS_EXT_XBGR, /* x/blue/green/red */ + JCS_EXT_XRGB, /* x/red/green/blue */ + /* When out_color_space it set to JCS_EXT_RGBX, JCS_EXT_BGRX, + JCS_EXT_XBGR, or JCS_EXT_XRGB during decompression, the X byte is + undefined, and in order to ensure the best performance, + libjpeg-turbo can set that byte to whatever value it wishes. Use + the following colorspace constants to ensure that the X byte is set + to 0xFF, so that it can be interpreted as an opaque alpha + channel. */ + JCS_EXT_RGBA, /* red/green/blue/alpha */ + JCS_EXT_BGRA, /* blue/green/red/alpha */ + JCS_EXT_ABGR, /* alpha/blue/green/red */ + JCS_EXT_ARGB /* alpha/red/green/blue */ +} J_COLOR_SPACE; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + void * client_data; /* Available for use by application */\ + boolean is_decompressor; /* So common code can tell which is which */\ + int global_state /* For checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + +#if JPEG_LIB_VERSION >= 70 + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + JDIMENSION jpeg_width; /* scaled JPEG image width */ + JDIMENSION jpeg_height; /* scaled JPEG image height */ + /* Dimensions of actual JPEG image that will be written to file, + * derived from input dimensions by scaling factors above. + * These fields are computed by jpeg_start_compress(). + * You can also use jpeg_calc_jpeg_dimensions() to determine these values + * in advance of calling jpeg_start_compress(). + */ +#endif + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; +#if JPEG_LIB_VERSION >= 70 + int q_scale_factor[NUM_QUANT_TBLS]; +#endif + /* ptrs to coefficient quantization tables, or NULL if not defined, + * and corresponding scale factors (percentage, initialized 100). + */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ +#if JPEG_LIB_VERSION >= 70 + boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ +#endif + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + UINT8 JFIF_major_version; /* What to write for the JFIF version number */ + UINT8 JFIF_minor_version; + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + +#if JPEG_LIB_VERSION >= 70 + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ +#endif + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + +#if JPEG_LIB_VERSION >= 80 + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) */ +#endif + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; + jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ + int script_space_size; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + +#if JPEG_LIB_VERSION >= 80 + boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ +#endif + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ + UINT8 JFIF_major_version; /* JFIF version number */ + UINT8 JFIF_minor_version; + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Aside from the specific data retained from APPn markers known to the + * library, the uninterpreted contents of any or all APPn and COM markers + * can be saved in a list for examination by the application. + */ + jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + +#if JPEG_LIB_VERSION >= 70 + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ +#else + int min_DCT_scaled_size; /* smallest DCT_scaled_size of any component */ +#endif + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_[v_]scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + +#if JPEG_LIB_VERSION >= 80 + /* These fields are derived from Se of first SOS marker. + */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array for entropy decode */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ +#endif + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(void, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; + + /* Maximum allocation request accepted by alloc_large. */ + long max_alloc_chunk; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_CreateCompress jCreaCompress +#define jpeg_CreateDecompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#if JPEG_LIB_VERSION >= 80 +#define jpeg_mem_dest jMemDest +#define jpeg_mem_src jMemSrc +#endif +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#if JPEG_LIB_VERSION >= 70 +#define jpeg_default_qtables jDefQTables +#endif +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#if JPEG_LIB_VERSION >= 70 +#define jpeg_calc_jpeg_dimensions jCjpegDimensions +#endif +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_m_header jWrtMHeader +#define jpeg_write_m_byte jWrtMByte +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#if JPEG_LIB_VERSION >= 80 +#define jpeg_core_output_dimensions jCoreDimensions +#endif +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_save_markers jSaveMarkers +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN(struct jpeg_error_mgr *) jpeg_std_error + JPP((struct jpeg_error_mgr * err)); + +/* Initialization of JPEG compression objects. + * jpeg_create_compress() and jpeg_create_decompress() are the exported + * names that applications should call. These expand to calls on + * jpeg_CreateCompress and jpeg_CreateDecompress with additional information + * passed for version mismatch checking. + * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. + */ +#define jpeg_create_compress(cinfo) \ + jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_compress_struct)) +#define jpeg_create_decompress(cinfo) \ + jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_decompress_struct)) +EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, + int version, size_t structsize)); +EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, + int version, size_t structsize)); +/* Destruction of JPEG compression objects */ +EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); +EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); + +#if JPEG_LIB_VERSION >= 80 +/* Data source and destination managers: memory buffers. */ +EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, + unsigned char ** outbuffer, + unsigned long * outsize)); +EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, + unsigned char * inbuffer, + unsigned long insize)); +#endif + +/* Default parameter setup for compression */ +EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +#if JPEG_LIB_VERSION >= 70 +EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, + boolean force_baseline)); +#endif +EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN(int) jpeg_quality_scaling JPP((int quality)); +EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +#if JPEG_LIB_VERSION >= 70 +/* Precalculate JPEG dimensions for current compression parameters. */ +EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); +#endif + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.txt concerning safe usage. */ +EXTERN(void) jpeg_write_marker + JPP((j_compress_ptr cinfo, int marker, + const JOCTET * dataptr, unsigned int datalen)); +/* Same, but piecemeal. */ +EXTERN(void) jpeg_write_m_header + JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); +EXTERN(void) jpeg_write_m_byte + JPP((j_compress_ptr cinfo, int val)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +#if JPEG_LIB_VERSION >= 80 +EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); +#endif +EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Control saving of COM and APPn markers into marker_list. */ +EXTERN(void) jpeg_save_markers + JPP((j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN(void) jpeg_set_marker_processor + JPP((j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +} +#endif +#endif + +#endif /* JPEGLIB_H */ diff --git a/platforms/vs2010/include/libjpeg/turbojpeg.h b/platforms/vs2010/include/libjpeg/turbojpeg.h new file mode 100755 index 0000000..7610221 --- /dev/null +++ b/platforms/vs2010/include/libjpeg/turbojpeg.h @@ -0,0 +1,917 @@ +/* + * Copyright (C)2009-2012 D. R. Commander. All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * - Neither the name of the libjpeg-turbo Project nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS", + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __TURBOJPEG_H__ +#define __TURBOJPEG_H__ + +#if defined(_WIN32) && defined(DLLDEFINE) +#define DLLEXPORT __declspec(dllexport) +#else +#define DLLEXPORT +#endif +#define DLLCALL + + +/** + * @addtogroup TurboJPEG + * TurboJPEG API. This API provides an interface for generating, decoding, and + * transforming planar YUV and JPEG images in memory. + * + * @{ + */ + + +/** + * The number of chrominance subsampling options + */ +#define TJ_NUMSAMP 5 + +/** + * Chrominance subsampling options. + * When an image is converted from the RGB to the YCbCr colorspace as part of + * the JPEG compression process, some of the Cb and Cr (chrominance) components + * can be discarded or averaged together to produce a smaller image with little + * perceptible loss of image clarity (the human eye is more sensitive to small + * changes in brightness than small changes in color.) This is called + * "chrominance subsampling". + */ +enum TJSAMP +{ + /** + * 4:4:4 chrominance subsampling (no chrominance subsampling). The JPEG or + * YUV image will contain one chrominance component for every pixel in the + * source image. + */ + TJSAMP_444=0, + /** + * 4:2:2 chrominance subsampling. The JPEG or YUV image will contain one + * chrominance component for every 2x1 block of pixels in the source image. + */ + TJSAMP_422, + /** + * 4:2:0 chrominance subsampling. The JPEG or YUV image will contain one + * chrominance component for every 2x2 block of pixels in the source image. + */ + TJSAMP_420, + /** + * Grayscale. The JPEG or YUV image will contain no chrominance components. + */ + TJSAMP_GRAY, + /** + * 4:4:0 chrominance subsampling. The JPEG or YUV image will contain one + * chrominance component for every 1x2 block of pixels in the source image. + */ + TJSAMP_440 +}; + +/** + * MCU block width (in pixels) for a given level of chrominance subsampling. + * MCU block sizes: + * - 8x8 for no subsampling or grayscale + * - 16x8 for 4:2:2 + * - 8x16 for 4:4:0 + * - 16x16 for 4:2:0 + */ +static const int tjMCUWidth[TJ_NUMSAMP] = {8, 16, 16, 8, 8}; + +/** + * MCU block height (in pixels) for a given level of chrominance subsampling. + * MCU block sizes: + * - 8x8 for no subsampling or grayscale + * - 16x8 for 4:2:2 + * - 8x16 for 4:4:0 + * - 16x16 for 4:2:0 + */ +static const int tjMCUHeight[TJ_NUMSAMP] = {8, 8, 16, 8, 16}; + + +/** + * The number of pixel formats + */ +#define TJ_NUMPF 11 + +/** + * Pixel formats + */ +enum TJPF +{ + /** + * RGB pixel format. The red, green, and blue components in the image are + * stored in 3-byte pixels in the order R, G, B from lowest to highest byte + * address within each pixel. + */ + TJPF_RGB=0, + /** + * BGR pixel format. The red, green, and blue components in the image are + * stored in 3-byte pixels in the order B, G, R from lowest to highest byte + * address within each pixel. + */ + TJPF_BGR, + /** + * RGBX pixel format. The red, green, and blue components in the image are + * stored in 4-byte pixels in the order R, G, B from lowest to highest byte + * address within each pixel. The X component is ignored when compressing + * and undefined when decompressing. + */ + TJPF_RGBX, + /** + * BGRX pixel format. The red, green, and blue components in the image are + * stored in 4-byte pixels in the order B, G, R from lowest to highest byte + * address within each pixel. The X component is ignored when compressing + * and undefined when decompressing. + */ + TJPF_BGRX, + /** + * XBGR pixel format. The red, green, and blue components in the image are + * stored in 4-byte pixels in the order R, G, B from highest to lowest byte + * address within each pixel. The X component is ignored when compressing + * and undefined when decompressing. + */ + TJPF_XBGR, + /** + * XRGB pixel format. The red, green, and blue components in the image are + * stored in 4-byte pixels in the order B, G, R from highest to lowest byte + * address within each pixel. The X component is ignored when compressing + * and undefined when decompressing. + */ + TJPF_XRGB, + /** + * Grayscale pixel format. Each 1-byte pixel represents a luminance + * (brightness) level from 0 to 255. + */ + TJPF_GRAY, + /** + * RGBA pixel format. This is the same as @ref TJPF_RGBX, except that when + * decompressing, the X component is guaranteed to be 0xFF, which can be + * interpreted as an opaque alpha channel. + */ + TJPF_RGBA, + /** + * BGRA pixel format. This is the same as @ref TJPF_BGRX, except that when + * decompressing, the X component is guaranteed to be 0xFF, which can be + * interpreted as an opaque alpha channel. + */ + TJPF_BGRA, + /** + * ABGR pixel format. This is the same as @ref TJPF_XBGR, except that when + * decompressing, the X component is guaranteed to be 0xFF, which can be + * interpreted as an opaque alpha channel. + */ + TJPF_ABGR, + /** + * ARGB pixel format. This is the same as @ref TJPF_XRGB, except that when + * decompressing, the X component is guaranteed to be 0xFF, which can be + * interpreted as an opaque alpha channel. + */ + TJPF_ARGB +}; + +/** + * Red offset (in bytes) for a given pixel format. This specifies the number + * of bytes that the red component is offset from the start of the pixel. For + * instance, if a pixel of format TJ_BGRX is stored in char pixel[], + * then the red component will be pixel[tjRedOffset[TJ_BGRX]]. + */ +static const int tjRedOffset[TJ_NUMPF] = {0, 2, 0, 2, 3, 1, 0, 0, 2, 3, 1}; +/** + * Green offset (in bytes) for a given pixel format. This specifies the number + * of bytes that the green component is offset from the start of the pixel. + * For instance, if a pixel of format TJ_BGRX is stored in + * char pixel[], then the green component will be + * pixel[tjGreenOffset[TJ_BGRX]]. + */ +static const int tjGreenOffset[TJ_NUMPF] = {1, 1, 1, 1, 2, 2, 0, 1, 1, 2, 2}; +/** + * Blue offset (in bytes) for a given pixel format. This specifies the number + * of bytes that the Blue component is offset from the start of the pixel. For + * instance, if a pixel of format TJ_BGRX is stored in char pixel[], + * then the blue component will be pixel[tjBlueOffset[TJ_BGRX]]. + */ +static const int tjBlueOffset[TJ_NUMPF] = {2, 0, 2, 0, 1, 3, 0, 2, 0, 1, 3}; + +/** + * Pixel size (in bytes) for a given pixel format. + */ +static const int tjPixelSize[TJ_NUMPF] = {3, 3, 4, 4, 4, 4, 1, 4, 4, 4, 4}; + + +/** + * The uncompressed source/destination image is stored in bottom-up (Windows, + * OpenGL) order, not top-down (X11) order. + */ +#define TJFLAG_BOTTOMUP 2 +/** + * Turn off CPU auto-detection and force TurboJPEG to use MMX code (if the + * underlying codec supports it.) + */ +#define TJFLAG_FORCEMMX 8 +/** + * Turn off CPU auto-detection and force TurboJPEG to use SSE code (if the + * underlying codec supports it.) + */ +#define TJFLAG_FORCESSE 16 +/** + * Turn off CPU auto-detection and force TurboJPEG to use SSE2 code (if the + * underlying codec supports it.) + */ +#define TJFLAG_FORCESSE2 32 +/** + * Turn off CPU auto-detection and force TurboJPEG to use SSE3 code (if the + * underlying codec supports it.) + */ +#define TJFLAG_FORCESSE3 128 +/** + * When decompressing, use the fastest chrominance upsampling algorithm + * available in the underlying codec. The default is to use smooth upsampling, + * which creates a smooth transition between neighboring chrominance components + * in order to reduce upsampling artifacts in the decompressed image. + */ +#define TJFLAG_FASTUPSAMPLE 256 +/** + * Disable buffer (re)allocation. If passed to #tjCompress2() or + * #tjTransform(), this flag will cause those functions to generate an error if + * the JPEG image buffer is invalid or too small rather than attempting to + * allocate or reallocate that buffer. This reproduces the behavior of earlier + * versions of TurboJPEG. + */ +#define TJFLAG_NOREALLOC 1024 +/** + * Use the fastest DCT/IDCT algorithm available in the underlying codec. The + * default if this flag is not specified is implementation-specific. The + * libjpeg implementation, for example, uses the fast algorithm by default when + * compressing, because this has been shown to have only a very slight effect + * on accuracy, but it uses the accurate algorithm when decompressing, because + * this has been shown to have a larger effect. + */ +#define TJFLAG_FASTDCT 2048 +/** + * Use the most accurate DCT/IDCT algorithm available in the underlying codec. + * The default if this flag is not specified is implementation-specific. The + * libjpeg implementation, for example, uses the fast algorithm by default when + * compressing, because this has been shown to have only a very slight effect + * on accuracy, but it uses the accurate algorithm when decompressing, because + * this has been shown to have a larger effect. + */ +#define TJFLAG_ACCURATEDCT 4096 + + +/** + * Number of transform operations + */ +#define TJ_NUMXOP 8 + +/** + * Transform operations for #tjTransform() + */ +enum TJXOP +{ + /** + * Do not transform the position of the image pixels + */ + TJXOP_NONE=0, + /** + * Flip (mirror) image horizontally. This transform is imperfect if there + * are any partial MCU blocks on the right edge (see #TJXOPT_PERFECT.) + */ + TJXOP_HFLIP, + /** + * Flip (mirror) image vertically. This transform is imperfect if there are + * any partial MCU blocks on the bottom edge (see #TJXOPT_PERFECT.) + */ + TJXOP_VFLIP, + /** + * Transpose image (flip/mirror along upper left to lower right axis.) This + * transform is always perfect. + */ + TJXOP_TRANSPOSE, + /** + * Transverse transpose image (flip/mirror along upper right to lower left + * axis.) This transform is imperfect if there are any partial MCU blocks in + * the image (see #TJXOPT_PERFECT.) + */ + TJXOP_TRANSVERSE, + /** + * Rotate image clockwise by 90 degrees. This transform is imperfect if + * there are any partial MCU blocks on the bottom edge (see + * #TJXOPT_PERFECT.) + */ + TJXOP_ROT90, + /** + * Rotate image 180 degrees. This transform is imperfect if there are any + * partial MCU blocks in the image (see #TJXOPT_PERFECT.) + */ + TJXOP_ROT180, + /** + * Rotate image counter-clockwise by 90 degrees. This transform is imperfect + * if there are any partial MCU blocks on the right edge (see + * #TJXOPT_PERFECT.) + */ + TJXOP_ROT270 +}; + + +/** + * This option will cause #tjTransform() to return an error if the transform is + * not perfect. Lossless transforms operate on MCU blocks, whose size depends + * on the level of chrominance subsampling used (see #tjMCUWidth + * and #tjMCUHeight.) If the image's width or height is not evenly divisible + * by the MCU block size, then there will be partial MCU blocks on the right + * and/or bottom edges. It is not possible to move these partial MCU blocks to + * the top or left of the image, so any transform that would require that is + * "imperfect." If this option is not specified, then any partial MCU blocks + * that cannot be transformed will be left in place, which will create + * odd-looking strips on the right or bottom edge of the image. + */ +#define TJXOPT_PERFECT 1 +/** + * This option will cause #tjTransform() to discard any partial MCU blocks that + * cannot be transformed. + */ +#define TJXOPT_TRIM 2 +/** + * This option will enable lossless cropping. See #tjTransform() for more + * information. + */ +#define TJXOPT_CROP 4 +/** + * This option will discard the color data in the input image and produce + * a grayscale output image. + */ +#define TJXOPT_GRAY 8 +/** + * This option will prevent #tjTransform() from outputting a JPEG image for + * this particular transform (this can be used in conjunction with a custom + * filter to capture the transformed DCT coefficients without transcoding + * them.) + */ +#define TJXOPT_NOOUTPUT 16 + + +/** + * Scaling factor + */ +typedef struct +{ + /** + * Numerator + */ + int num; + /** + * Denominator + */ + int denom; +} tjscalingfactor; + +/** + * Cropping region + */ +typedef struct +{ + /** + * The left boundary of the cropping region. This must be evenly divisible + * by the MCU block width (see #tjMCUWidth.) + */ + int x; + /** + * The upper boundary of the cropping region. This must be evenly divisible + * by the MCU block height (see #tjMCUHeight.) + */ + int y; + /** + * The width of the cropping region. Setting this to 0 is the equivalent of + * setting it to the width of the source JPEG image - x. + */ + int w; + /** + * The height of the cropping region. Setting this to 0 is the equivalent of + * setting it to the height of the source JPEG image - y. + */ + int h; +} tjregion; + +/** + * Lossless transform + */ +typedef struct tjtransform +{ + /** + * Cropping region + */ + tjregion r; + /** + * One of the @ref TJXOP "transform operations" + */ + int op; + /** + * The bitwise OR of one of more of the @ref TJXOPT_CROP "transform options" + */ + int options; + /** + * Arbitrary data that can be accessed within the body of the callback + * function + */ + void *data; + /** + * A callback function that can be used to modify the DCT coefficients + * after they are losslessly transformed but before they are transcoded to a + * new JPEG file. This allows for custom filters or other transformations to + * be applied in the frequency domain. + * + * @param coeffs pointer to an array of transformed DCT coefficients. (NOTE: + * this pointer is not guaranteed to be valid once the callback + * returns, so applications wishing to hand off the DCT coefficients + * to another function or library should make a copy of them within + * the body of the callback.) + * @param arrayRegion #tjregion structure containing the width and height of + * the array pointed to by coeffs as well as its offset + * relative to the component plane. TurboJPEG implementations may + * choose to split each component plane into multiple DCT coefficient + * arrays and call the callback function once for each array. + * @param planeRegion #tjregion structure containing the width and height of + * the component plane to which coeffs belongs + * @param componentID ID number of the component plane to which + * coeffs belongs (Y, Cb, and Cr have, respectively, ID's of + * 0, 1, and 2 in typical JPEG images.) + * @param transformID ID number of the transformed image to which + * coeffs belongs. This is the same as the index of the + * transform in the transforms array that was passed to + * #tjTransform(). + * @param transform a pointer to a #tjtransform structure that specifies the + * parameters and/or cropping region for this transform + * + * @return 0 if the callback was successful, or -1 if an error occurred. + */ + int (*customFilter)(short *coeffs, tjregion arrayRegion, + tjregion planeRegion, int componentIndex, int transformIndex, + struct tjtransform *transform); +} tjtransform; + +/** + * TurboJPEG instance handle + */ +typedef void* tjhandle; + + +/** + * Pad the given width to the nearest 32-bit boundary + */ +#define TJPAD(width) (((width)+3)&(~3)) + +/** + * Compute the scaled value of dimension using the given scaling + * factor. This macro performs the integer equivalent of ceil(dimension * + * scalingFactor). + */ +#define TJSCALED(dimension, scalingFactor) ((dimension * scalingFactor.num \ + + scalingFactor.denom - 1) / scalingFactor.denom) + + +#ifdef __cplusplus +extern "C" { +#endif + + +/** + * Create a TurboJPEG compressor instance. + * + * @return a handle to the newly-created instance, or NULL if an error + * occurred (see #tjGetErrorStr().) + */ +DLLEXPORT tjhandle DLLCALL tjInitCompress(void); + + +/** + * Compress an RGB or grayscale image into a JPEG image. + * + * @param handle a handle to a TurboJPEG compressor or transformer instance + * @param srcBuf pointer to an image buffer containing RGB or grayscale pixels + * to be compressed + * @param width width (in pixels) of the source image + * @param pitch bytes per line of the source image. Normally, this should be + * width * #tjPixelSize[pixelFormat] if the image is unpadded, + * or #TJPAD(width * #tjPixelSize[pixelFormat]) if each line of + * the image is padded to the nearest 32-bit boundary, as is the case + * for Windows bitmaps. You can also be clever and use this parameter + * to skip lines, etc. Setting this parameter to 0 is the equivalent of + * setting it to width * #tjPixelSize[pixelFormat]. + * @param height height (in pixels) of the source image + * @param pixelFormat pixel format of the source image (see @ref TJPF + * "Pixel formats".) + * @param jpegBuf address of a pointer to an image buffer that will receive the + * JPEG image. TurboJPEG has the ability to reallocate the JPEG buffer + * to accommodate the size of the JPEG image. Thus, you can choose to: + * -# pre-allocate the JPEG buffer with an arbitrary size using + * #tjAlloc() and let TurboJPEG grow the buffer as needed, + * -# set *jpegBuf to NULL to tell TurboJPEG to allocate the + * buffer for you, or + * -# pre-allocate the buffer to a "worst case" size determined by + * calling #tjBufSize(). This should ensure that the buffer never has + * to be re-allocated (setting #TJFLAG_NOREALLOC guarantees this.) + * . + * If you choose option 1, *jpegSize should be set to the + * size of your pre-allocated buffer. In any case, unless you have + * set #TJFLAG_NOREALLOC, you should always check *jpegBuf upon + * return from this function, as it may have changed. + * @param jpegSize pointer to an unsigned long variable that holds the size of + * the JPEG image buffer. If *jpegBuf points to a + * pre-allocated buffer, then *jpegSize should be set to the + * size of the buffer. Upon return, *jpegSize will contain the + * size of the JPEG image (in bytes.) + * @param jpegSubsamp the level of chrominance subsampling to be used when + * generating the JPEG image (see @ref TJSAMP + * "Chrominance subsampling options".) + * @param jpegQual the image quality of the generated JPEG image (1 = worst, + 100 = best) + * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP + * "flags". + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) +*/ +DLLEXPORT int DLLCALL tjCompress2(tjhandle handle, unsigned char *srcBuf, + int width, int pitch, int height, int pixelFormat, unsigned char **jpegBuf, + unsigned long *jpegSize, int jpegSubsamp, int jpegQual, int flags); + + +/** + * The maximum size of the buffer (in bytes) required to hold a JPEG image with + * the given parameters. The number of bytes returned by this function is + * larger than the size of the uncompressed source image. The reason for this + * is that the JPEG format uses 16-bit coefficients, and it is thus possible + * for a very high-quality JPEG image with very high frequency content to + * expand rather than compress when converted to the JPEG format. Such images + * represent a very rare corner case, but since there is no way to predict the + * size of a JPEG image prior to compression, the corner case has to be + * handled. + * + * @param width width of the image (in pixels) + * @param height height of the image (in pixels) + * @param jpegSubsamp the level of chrominance subsampling to be used when + * generating the JPEG image (see @ref TJSAMP + * "Chrominance subsampling options".) + * + * @return the maximum size of the buffer (in bytes) required to hold the + * image, or -1 if the arguments are out of bounds. + */ +DLLEXPORT unsigned long DLLCALL tjBufSize(int width, int height, + int jpegSubsamp); + + +/** + * The size of the buffer (in bytes) required to hold a YUV planar image with + * the given parameters. + * + * @param width width of the image (in pixels) + * @param height height of the image (in pixels) + * @param subsamp level of chrominance subsampling in the image (see + * @ref TJSAMP "Chrominance subsampling options".) + * + * @return the size of the buffer (in bytes) required to hold the image, or + * -1 if the arguments are out of bounds. + */ +DLLEXPORT unsigned long DLLCALL tjBufSizeYUV(int width, int height, + int subsamp); + + +/** + * Encode an RGB or grayscale image into a YUV planar image. This function + * uses the accelerated color conversion routines in TurboJPEG's underlying + * codec to produce a planar YUV image that is suitable for X Video. + * Specifically, if the chrominance components are subsampled along the + * horizontal dimension, then the width of the luminance plane is padded to 2 + * in the output image (same goes for the height of the luminance plane, if the + * chrominance components are subsampled along the vertical dimension.) Also, + * each line of each plane in the output image is padded to 4 bytes. Although + * this will work with any subsampling option, it is really only useful in + * combination with TJ_420, which produces an image compatible with the I420 + * (AKA "YUV420P") format. + * + * @param handle a handle to a TurboJPEG compressor or transformer instance + * @param srcBuf pointer to an image buffer containing RGB or grayscale pixels + * to be encoded + * @param width width (in pixels) of the source image + * @param pitch bytes per line of the source image. Normally, this should be + * width * #tjPixelSize[pixelFormat] if the image is unpadded, + * or #TJPAD(width * #tjPixelSize[pixelFormat]) if each line of + * the image is padded to the nearest 32-bit boundary, as is the case + * for Windows bitmaps. You can also be clever and use this parameter + * to skip lines, etc. Setting this parameter to 0 is the equivalent of + * setting it to width * #tjPixelSize[pixelFormat]. + * @param height height (in pixels) of the source image + * @param pixelFormat pixel format of the source image (see @ref TJPF + * "Pixel formats".) + * @param dstBuf pointer to an image buffer that will receive the YUV image. + * Use #tjBufSizeYUV() to determine the appropriate size for this buffer + * based on the image width, height, and level of chrominance + * subsampling. + * @param subsamp the level of chrominance subsampling to be used when + * generating the YUV image (see @ref TJSAMP + * "Chrominance subsampling options".) + * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP + * "flags". + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) +*/ +DLLEXPORT int DLLCALL tjEncodeYUV2(tjhandle handle, + unsigned char *srcBuf, int width, int pitch, int height, int pixelFormat, + unsigned char *dstBuf, int subsamp, int flags); + + +/** + * Create a TurboJPEG decompressor instance. + * + * @return a handle to the newly-created instance, or NULL if an error + * occurred (see #tjGetErrorStr().) +*/ +DLLEXPORT tjhandle DLLCALL tjInitDecompress(void); + + +/** + * Retrieve information about a JPEG image without decompressing it. + * + * @param handle a handle to a TurboJPEG decompressor or transformer instance + * @param jpegBuf pointer to a buffer containing a JPEG image + * @param jpegSize size of the JPEG image (in bytes) + * @param width pointer to an integer variable that will receive the width (in + * pixels) of the JPEG image + * @param height pointer to an integer variable that will receive the height + * (in pixels) of the JPEG image + * @param jpegSubsamp pointer to an integer variable that will receive the + * level of chrominance subsampling used when compressing the JPEG image + * (see @ref TJSAMP "Chrominance subsampling options".) + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) +*/ +DLLEXPORT int DLLCALL tjDecompressHeader2(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height, + int *jpegSubsamp); + + +/** + * Returns a list of fractional scaling factors that the JPEG decompressor in + * this implementation of TurboJPEG supports. + * + * @param numscalingfactors pointer to an integer variable that will receive + * the number of elements in the list + * + * @return a pointer to a list of fractional scaling factors, or NULL if an + * error is encountered (see #tjGetErrorStr().) +*/ +DLLEXPORT tjscalingfactor* DLLCALL tjGetScalingFactors(int *numscalingfactors); + + +/** + * Decompress a JPEG image to an RGB or grayscale image. + * + * @param handle a handle to a TurboJPEG decompressor or transformer instance + * @param jpegBuf pointer to a buffer containing the JPEG image to decompress + * @param jpegSize size of the JPEG image (in bytes) + * @param dstBuf pointer to an image buffer that will receive the decompressed + * image. This buffer should normally be pitch * scaledHeight + * bytes in size, where scaledHeight can be determined by + * calling #TJSCALED() with the JPEG image height and one of the scaling + * factors returned by #tjGetScalingFactors(). The dstBuf pointer may + * also be used to decompress into a specific region of a larger buffer. + * @param width desired width (in pixels) of the destination image. If this is + * smaller than the width of the JPEG image being decompressed, then + * TurboJPEG will use scaling in the JPEG decompressor to generate the + * largest possible image that will fit within the desired width. If + * width is set to 0, then only the height will be considered when + * determining the scaled image size. + * @param pitch bytes per line of the destination image. Normally, this is + * scaledWidth * #tjPixelSize[pixelFormat] if the decompressed + * image is unpadded, else #TJPAD(scaledWidth * + * #tjPixelSize[pixelFormat]) if each line of the decompressed + * image is padded to the nearest 32-bit boundary, as is the case for + * Windows bitmaps. (NOTE: scaledWidth can be determined by + * calling #TJSCALED() with the JPEG image width and one of the scaling + * factors returned by #tjGetScalingFactors().) You can also be clever + * and use the pitch parameter to skip lines, etc. Setting this + * parameter to 0 is the equivalent of setting it to scaledWidth + * * #tjPixelSize[pixelFormat]. + * @param height desired height (in pixels) of the destination image. If this + * is smaller than the height of the JPEG image being decompressed, then + * TurboJPEG will use scaling in the JPEG decompressor to generate the + * largest possible image that will fit within the desired height. If + * height is set to 0, then only the width will be considered when + * determining the scaled image size. + * @param pixelFormat pixel format of the destination image (see @ref + * TJPF "Pixel formats".) + * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP + * "flags". + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) + */ +DLLEXPORT int DLLCALL tjDecompress2(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf, + int width, int pitch, int height, int pixelFormat, int flags); + + +/** + * Decompress a JPEG image to a YUV planar image. This function performs JPEG + * decompression but leaves out the color conversion step, so a planar YUV + * image is generated instead of an RGB image. The padding of the planes in + * this image is the same as the images generated by #tjEncodeYUV2(). Note + * that, if the width or height of the image is not an even multiple of the MCU + * block size (see #tjMCUWidth and #tjMCUHeight), then an intermediate buffer + * copy will be performed within TurboJPEG. + * + * @param handle a handle to a TurboJPEG decompressor or transformer instance + * @param jpegBuf pointer to a buffer containing the JPEG image to decompress + * @param jpegSize size of the JPEG image (in bytes) + * @param dstBuf pointer to an image buffer that will receive the YUV image. + * Use #tjBufSizeYUV to determine the appropriate size for this buffer + * based on the image width, height, and level of subsampling. + * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP + * "flags". + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) + */ +DLLEXPORT int DLLCALL tjDecompressToYUV(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf, + int flags); + + +/** + * Create a new TurboJPEG transformer instance. + * + * @return a handle to the newly-created instance, or NULL if an error + * occurred (see #tjGetErrorStr().) + */ +DLLEXPORT tjhandle DLLCALL tjInitTransform(void); + + +/** + * Losslessly transform a JPEG image into another JPEG image. Lossless + * transforms work by moving the raw coefficients from one JPEG image structure + * to another without altering the values of the coefficients. While this is + * typically faster than decompressing the image, transforming it, and + * re-compressing it, lossless transforms are not free. Each lossless + * transform requires reading and Huffman decoding all of the coefficients in + * the source image, regardless of the size of the destination image. Thus, + * this function provides a means of generating multiple transformed images + * from the same source or of applying multiple transformations simultaneously, + * in order to eliminate the need to read the source coefficients multiple + * times. + * + * @param handle a handle to a TurboJPEG transformer instance + * @param jpegBuf pointer to a buffer containing the JPEG image to transform + * @param jpegSize size of the JPEG image (in bytes) + * @param n the number of transformed JPEG images to generate + * @param dstBufs pointer to an array of n image buffers. dstBufs[i] + * will receive a JPEG image that has been transformed using the + * parameters in transforms[i]. TurboJPEG has the ability to + * reallocate the JPEG buffer to accommodate the size of the JPEG image. + * Thus, you can choose to: + * -# pre-allocate the JPEG buffer with an arbitrary size using + * #tjAlloc() and let TurboJPEG grow the buffer as needed, + * -# set dstBufs[i] to NULL to tell TurboJPEG to allocate the + * buffer for you, or + * -# pre-allocate the buffer to a "worst case" size determined by + * calling #tjBufSize() with the cropped width and height. This should + * ensure that the buffer never has to be re-allocated (setting + * #TJFLAG_NOREALLOC guarantees this.) + * . + * If you choose option 1, dstSizes[i] should be set to + * the size of your pre-allocated buffer. In any case, unless you have + * set #TJFLAG_NOREALLOC, you should always check dstBufs[i] + * upon return from this function, as it may have changed. + * @param dstSizes pointer to an array of n unsigned long variables that will + * receive the actual sizes (in bytes) of each transformed JPEG image. + * If dstBufs[i] points to a pre-allocated buffer, then + * dstSizes[i] should be set to the size of the buffer. Upon + * return, dstSizes[i] will contain the size of the JPEG image + * (in bytes.) + * @param transforms pointer to an array of n tjtransform structures, each of + * which specifies the transform parameters and/or cropping region for + * the corresponding transformed output image. + * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP + * "flags". + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) + */ +DLLEXPORT int DLLCALL tjTransform(tjhandle handle, unsigned char *jpegBuf, + unsigned long jpegSize, int n, unsigned char **dstBufs, + unsigned long *dstSizes, tjtransform *transforms, int flags); + + +/** + * Destroy a TurboJPEG compressor, decompressor, or transformer instance. + * + * @param handle a handle to a TurboJPEG compressor, decompressor or + * transformer instance + * + * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().) + */ +DLLEXPORT int DLLCALL tjDestroy(tjhandle handle); + + +/** + * Allocate an image buffer for use with TurboJPEG. You should always use + * this function to allocate the JPEG destination buffer(s) for #tjCompress2() + * and #tjTransform() unless you are disabling automatic buffer + * (re)allocation (by setting #TJFLAG_NOREALLOC.) + * + * @param bytes the number of bytes to allocate + * + * @return a pointer to a newly-allocated buffer with the specified number of + * bytes + * + * @sa tjFree() + */ +DLLEXPORT unsigned char* DLLCALL tjAlloc(int bytes); + + +/** + * Free an image buffer previously allocated by TurboJPEG. You should always + * use this function to free JPEG destination buffer(s) that were automatically + * (re)allocated by #tjCompress2() or #tjTransform() or that were manually + * allocated using #tjAlloc(). + * + * @param buffer address of the buffer to free + * + * @sa tjAlloc() + */ +DLLEXPORT void DLLCALL tjFree(unsigned char *buffer); + + +/** + * Returns a descriptive error message explaining why the last command failed. + * + * @return a descriptive error message explaining why the last command failed. + */ +DLLEXPORT char* DLLCALL tjGetErrorStr(void); + + +/* Backward compatibility functions and macros (nothing to see here) */ +#define NUMSUBOPT TJ_NUMSAMP +#define TJ_444 TJSAMP_444 +#define TJ_422 TJSAMP_422 +#define TJ_420 TJSAMP_420 +#define TJ_411 TJSAMP_420 +#define TJ_GRAYSCALE TJSAMP_GRAY + +#define TJ_BGR 1 +#define TJ_BOTTOMUP TJFLAG_BOTTOMUP +#define TJ_FORCEMMX TJFLAG_FORCEMMX +#define TJ_FORCESSE TJFLAG_FORCESSE +#define TJ_FORCESSE2 TJFLAG_FORCESSE2 +#define TJ_ALPHAFIRST 64 +#define TJ_FORCESSE3 TJFLAG_FORCESSE3 +#define TJ_FASTUPSAMPLE TJFLAG_FASTUPSAMPLE +#define TJ_YUV 512 + +DLLEXPORT unsigned long DLLCALL TJBUFSIZE(int width, int height); + +DLLEXPORT unsigned long DLLCALL TJBUFSIZEYUV(int width, int height, + int jpegSubsamp); + +DLLEXPORT int DLLCALL tjCompress(tjhandle handle, unsigned char *srcBuf, + int width, int pitch, int height, int pixelSize, unsigned char *dstBuf, + unsigned long *compressedSize, int jpegSubsamp, int jpegQual, int flags); + +DLLEXPORT int DLLCALL tjEncodeYUV(tjhandle handle, + unsigned char *srcBuf, int width, int pitch, int height, int pixelSize, + unsigned char *dstBuf, int subsamp, int flags); + +DLLEXPORT int DLLCALL tjDecompressHeader(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height); + +DLLEXPORT int DLLCALL tjDecompress(tjhandle handle, + unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf, + int width, int pitch, int height, int pixelSize, int flags); + + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif -- cgit v1.2.3