inital commitHEADmain

1 files changed, 175 insertions, 0 deletions

diff --git a/PrusaSlicer/TinyMaker.ini b/PrusaSlicer/TinyMaker.ini
new file mode 100644
index 0000000..425c759
--- /dev/null
+++ b/PrusaSlicer/TinyMaker.ini
@@ -0,0 +1,175 @@
+# generated by PrusaSlicer 2.9.5 on 2026-05-23 at 14:26:24 UTC
+absolute_correction = 0
+area_fill = 35
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,40.8x0,40.8x30.6,0x30.6
+bottle_cost = 0
+bottle_volume = 1000
+bottle_weight = 1
+branchingsupport_base_diameter = 4
+branchingsupport_base_height = 1
+branchingsupport_base_safety_distance = 1
+branchingsupport_buildplate_only = 0
+branchingsupport_critical_angle = 45
+branchingsupport_head_front_diameter = 0.4
+branchingsupport_head_penetration = 0.2
+branchingsupport_head_width = 1
+branchingsupport_max_bridge_length = 5
+branchingsupport_max_bridges_on_pillar = 2
+branchingsupport_max_pillar_link_distance = 10
+branchingsupport_max_weight_on_model = 10
+branchingsupport_object_elevation = 5
+branchingsupport_pillar_connection_mode = dynamic
+branchingsupport_pillar_diameter = 1
+branchingsupport_pillar_widening_factor = 0.5
+branchingsupport_small_pillar_diameter_percent = 50%
+compatible_prints = 
+compatible_prints_condition = 
+default_sla_material_profile = TinyMaker
+default_sla_print_profile = TinyMaker
+delay_after_exposure = 0,0
+delay_before_exposure = 3,3
+delay_to_reflood = 0,0
+display_height = 30.6
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 320
+display_pixels_y = 240
+display_width = 40.8
+dynamic_delay_before_profile = disabled,disabled
+dynamic_delay_before_timeout = 50,50
+dynamic_tilt_down_profile = disabled,disabled
+dynamic_tilt_up_profile = disabled,disabled
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+exposure_time = 14
+faded_layers = 8
+fast_tilt_time = 5
+gamma_correction = 1
+high_viscosity_tilt_time = 10
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+host_type = prusalink
+initial_exposure_time = 35
+initial_layer_height = 0.3
+layer_height = 0.05
+material_colour = #29B2B2
+material_correction = 1,1,1
+material_correction_x = 1
+material_correction_y = 1
+material_correction_z = 1
+material_density = 1
+material_notes = 
+material_ow_absolute_correction = nil
+material_ow_branchingsupport_critical_angle = nil
+material_ow_branchingsupport_head_front_diameter = nil
+material_ow_branchingsupport_head_penetration = nil
+material_ow_branchingsupport_head_width = nil
+material_ow_branchingsupport_max_bridge_length = nil
+material_ow_branchingsupport_max_bridges_on_pillar = nil
+material_ow_branchingsupport_max_pillar_link_distance = nil
+material_ow_branchingsupport_pillar_diameter = nil
+material_ow_branchingsupport_small_pillar_diameter_percent = nil
+material_ow_elefant_foot_compensation = nil
+material_ow_faded_layers = 8
+material_ow_pad_wall_slope = nil
+material_ow_support_critical_angle = nil
+material_ow_support_head_front_diameter = nil
+material_ow_support_head_penetration = nil
+material_ow_support_head_width = nil
+material_ow_support_max_bridge_length = nil
+material_ow_support_max_bridges_on_pillar = nil
+material_ow_support_max_pillar_link_distance = nil
+material_ow_support_pillar_diameter = nil
+material_ow_support_points_density_relative = nil
+material_ow_support_small_pillar_diameter_percent = nil
+material_print_speed = fast
+material_type = Tough
+material_uuid = 
+material_vendor = (Unknown)
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 60
+min_exposure_time = 0.8
+min_initial_exposure_time = 0.8
+output_filename_format = [input_filename_base].zip
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 2
+physical_printer_settings_id = 
+print_host = 
+printer_model = TinyMaker
+printer_notes = 
+printer_settings_id = TinyMaker
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+printing_temperature = nil
+relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+sla_archive_format = SL1
+sla_material_settings_id = TinyMaker
+sla_output_precision = 0.001
+sla_print_settings_id = TinyMaker
+slice_closing_radius = 0.049
+slicing_mode = regular
+slow_tilt_time = 8
+support_base_diameter = 4
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_enforcers_only = 0
+support_head_front_diameter = 0.4
+support_head_penetration = 0.2
+support_head_width = 1
+support_max_bridge_length = 15
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_max_weight_on_model = 10
+support_object_elevation = 5
+support_pillar_connection_mode = dynamic
+support_pillar_diameter = 1
+support_pillar_widening_factor = 0.5
+support_points_density_relative = 100
+support_small_pillar_diameter_percent = 50%
+support_tree_type = default
+supports_enable = 1
+thumbnails = 224x168/PNG
+tilt_down_cycles = 1,1
+tilt_down_delay = 0,0
+tilt_down_finish_speed = layer1750,layer1750
+tilt_down_finish_speed_slx = layer160,layer160
+tilt_down_initial_speed = layer1750,layer1750
+tilt_down_initial_speed_slx = layer160,layer160
+tilt_down_offset_delay = 0,0
+tilt_down_offset_steps = 0,0
+tilt_up_cycles = 1,1
+tilt_up_delay = 0,0
+tilt_up_finish_speed = layer1750,layer1750
+tilt_up_finish_speed_slx = layer160,layer160
+tilt_up_initial_speed = move8000,move8000
+tilt_up_initial_speed_slx = layer160,layer160
+tilt_up_offset_delay = 0,0
+tilt_up_offset_steps = 1200,1200
+tower_hop_height = 0,0
+tower_speed = layer22,layer22
+use_tilt = 1,1
+zcorrection_layers = 0